Products

For Precast Application

U-X

  • inch
  • mm
    • All sleeves meet Type1 & Type2 requirements of ACI 318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum embedment length must follow sleeve size)
    • Can be epoxy or galvanize coating.
    • Set Screw option to lock rebar in place at the time of plant operation.
    • All sleeves meet Type1 & Type2 requirements of ACI 318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum embedment length must follow sleeve size)
    • Can be epoxy or galvanize coating.
    • Set Screw option to lock rebar in place at the time of plant operation.

A11W

  • inch
  • mm
  • A11W is specifically designed for improved useability.

    • More tolerance
    • Imperial   &   inch PVC tube ports
    • Screw in type plug
    • All sleeves meet Type1 & Type2 requirements of ACI 318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum embedment length must follow sleeve size)
    • Can be epoxy or galvanize coating.
    • Set Screw option to lock rebar in place at the time of plant operation.
  • A11W is specifically designed for improved useability.

    • More tolerance
    • Imperial   &   inch PVC tube ports
    • Screw in type plug
    • All sleeves meet Type1 & Type2 requirements of ACI 318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum embedment length must follow sleeve size)
    • Can be epoxy or galvanize coating.
    • Set Screw option to lock rebar in place at the time of plant operation.

For Cast-In-Place Application

Slim-Sleeve

  • inch
  • mm
  • SLIM-SLEEVE is designed for cast-in-place construction, horizontal and vertical connections.

    • Supplied with Set Screws and Slim Plugs. Rebar stop option for vertical application.
    • Ample tolerance for cast-in-place bar connection, or closure-pour between precast members
    • All sleeves meet Type 1 & Type 2 requirements of ACI318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum bar embedment length must follow the sleeve size)
    • Can be epoxy or galvanize coating.
  • SLIM-SLEEVE is designed for cast-in-place construction, horizontal and vertical connections.

    • Supplied with Set Screws and Slim Plugs. Rebar stop option for vertical application.
    • Ample tolerance for cast-in-place bar connection, or closure-pour between precast members
    • All sleeves meet Type 1 & Type 2 requirements of ACI318.
    • All sleeves can connect rebars of the same size or up to 2 sizes smaller than the sleeve size.
      (Minimum bar embedment length must follow the sleeve size)
    • Can be epoxy or galvanize coating.

SS Mortar (Splice Sleeve Grout)

  • SS Mortar (Splice Sleeve Grout) is a Non-Shrink, Non-Metallic, High Strength grout Specifically designed for the system

    • All sleeves must be filled completely with SS Mortar. No other grout can be used for NMB Splice Sleeve System.
    • Must be mixed with 1 Gallon of water and 1 bag of SS Mortar. No partial bag.
    • Mixing time: 2.5 minutes

CONTACT US